🚴 Smart LED Bike Tail Light with Wireless Turn Signals – Ground Arrow Projection, 120dB Alert, USB-C Rechargeable & 2 Bonus Wheel Lights
🚴 Smart LED Bike Tail Light with Wireless Turn Signals – Ground Arrow Projection, 120dB Alert, USB-C Rechargeable & 2 Bonus Wheel Lights
Promotion à durée limitée
Impossible de charger la disponibilité du service de retrait
- American express payment method
- Apple pay payment method
- Bancontact payment method
- Diners club payment method
- Discover payment method
- Google pay payment method
- Master payment method
- Mbway payment method
- Paypal payment method
- Satispay payment method
- Shopify pay payment method
- Visa payment method
[date_de_début]
Commandé
- - -
Commande prête
- - -
Livré
🚴 Smart LED Bike Tail Light with Wireless Turn Signals – Ground Arrow Projection, 120dB Alert, USB-C Rechargeable & 2 Bonus Wheel Lights
FAQ
FAQ
FAQ – Foire aux questions
1. Quand ma commande sera-t-elle expédiée ?
La plupart des commandes sont traitées sous 1 à 2 jours ouvrés.
2. Quel est le délai de livraison ?
La livraison standard aux États-Unis prend généralement 5 à 12 jours ouvrés. Les commandes internationales peuvent prendre plus de temps.
3. Comment puis-je suivre ma commande ?
Une fois votre commande expédiée, vous recevrez un e-mail contenant un numéro de suivi.
4. Puis-je modifier ou annuler ma commande ?
Les commandes ne peuvent être modifiées ou annulées qu' avant leur expédition. Contactez-nous dès que possible si vous avez besoin d'aide.
5. Quels moyens de paiement acceptez-vous ?
Nous acceptons les principales cartes de crédit/débit, PayPal, Shop Pay, Apple Pay et d'autres options de paiement sécurisées (selon la disponibilité).
6. Que faire si l'article est arrivé endommagé ?
Veuillez nous envoyer un e-mail avec une photo de l'article endommagé sous 48 heures, et nous organiserons un remplacement ou un remboursement.
7. Que faire si le colis est perdu ?
Si votre colis est marqué comme « livré » mais que vous ne l'avez pas reçu, contactez-nous et nous vous aiderons à mener une enquête auprès du transporteur.
8. Expédiez-vous à l'international ?
Oui, nous expédions dans la plupart des pays. Les délais d'expédition varient en fonction de la destination.
Don't Just Ride. Make Your Next Move Seen.
A Bicycle Tail Light That Signals More Than Just Your Presence.
Night riding is about more than being visible. It's about communicating where you're going. This smart bicycle tail light combines bright red rear lighting, wireless turn signals, projected directional arrows, and an audible alert to help make your turning intentions clearer to the people behind you.
Being Seen Is One Thing. Being Understood Is Another.
A regular rear light can show that a bike is ahead. But when you approach an intersection or prepare to turn, other road users may need an additional indication of your intended direction. That's where this smart signal system adds another layer of communication.
Low-Light Riding
At night or before sunrise, a clear rear light becomes especially useful.
Turning at Intersections
Communicating a left or right turn can be challenging in busy traffic.
Sharing the Road
Drivers, pedestrians, and other cyclists all benefit from clear signals.
Light It. Project It. Sound It.
Rather than relying on a single visual cue, the system combines rear LED illumination, directional ground projection, and a beeping turn alert. Activate the signal from the handlebar remote while maintaining your riding position.
Rear LED Lighting
Bright red lighting makes the back of your bike easier to identify in low light.
Directional Projection
Illuminated yellow arrows appear on the pavement to indicate a turn.
Audible Turn Reminder
A beeping alert accompanies turn-signal activation, adding an audible cue.
Your Next Turn. Projected on the Road.
Not Just a Flashing Arrow. A Directional Signal on the Pavement.
Activate your turn signal and the optical projection system casts an illuminated directional arrow onto the ground behind your bicycle. The result is a distinctive visual cue that stands out especially well in darker riding conditions.
Left-Turn Projection
Use the remote to activate the left directional indicator and projection.
Right-Turn Projection
Signal your intended right turn with directional illumination.
Distinctive Ground Effect
Add a striking visual element to your bicycle's rear signaling setup.
One Tap. Clear Direction.
The compact wireless remote keeps the essential controls within easy reach. Select your left or right signal without reaching back to the taillight. Its simple button layout makes it straightforward to use during everyday rides.
Left Signal
Activate the left-turn lighting and directional projection.
Right Signal
Indicate your intended right turn from the handlebar remote.
Mode & Power
Access the available lighting modes through the remote controls.
Designed to Make Signaling Simpler.
The remote is designed for automatic connection to the powered-on taillight. Remove the remote's battery insulation tab before first use.
The Turn Signal Doesn't Have to Be Silent.
When a turn signal is activated, the taillight produces an audible beeping reminder. Unlike designs that place the sound source only at the handlebar, this system emits the alert from the rear light.
Up to 120dB Advertised Audio Alert.
The audible cue adds another way to communicate during a turn. It also serves as a reminder that your turn signal is active, so you can switch it off after completing the maneuver.
Five Lighting Modes. Ready for Different Rides.
Choose the lighting behavior that suits your riding conditions. From a subtle standby indication to steady rear illumination and directional signaling, the system offers several ways to use your taillight.
Standby
Periodic light indication while the unit remains in standby.
Steady Red
Consistent red rear illumination for everyday riding.
Flashing Red
Attention-getting intermittent red LED lighting.
Alert & Projection
Combines the red light with additional projected illumination.
Turn Signals
Activate left or right directional signaling with an audible beep.
USB-C Charging
Recharge the built-in battery through the modern USB-C port.
Recharge. Remount. Ride Again.
No disposable batteries are required for the rechargeable taillight itself. The product advertises up to 16 hours of operating time, depending on lighting mode and usage conditions.
A Standard Taillight vs. a Smarter Signal System.
Basic Rear Taillight
Provides rear illumination.
May offer steady or flashing modes.
Usually focuses on visibility rather than directional communication.
Smart Signal Taillight
Red rear lighting.
Remote-controlled left and right signals.
Projected arrows and an audible turn alert.
One System. Many Ways to Ride.
The flexible mounting design works with many bicycles featuring round seatposts and handlebars. Check your available mounting space and tube dimensions to confirm compatibility before ordering.
Road & City Bikes
An additional signaling accessory for commuting and urban riding.
Mountain & Hybrid Bikes
Suitable for many compatible round frame mounting points.
E-Bikes & Folding Bikes
Can suit compatible electric and folding bikes with appropriate mounting space.
From Morning Commutes to After-Dark Adventures.
City Streets
Add directional cues to urban riding and intersections.
Night Rides
Bring bright rear LEDs and visual projection to darker conditions.
Delivery Routes
Convenient remote signaling for frequent stops and turns.
Changing Weather
IP65-rated housing helps handle rain and road spray.
A Thoughtful Gift for Someone Who Loves Cycling.
Whether they're a daily commuter, a weekend rider, or someone who loves useful bike accessories, a wireless signaling taillight makes a practical addition to their cycling gear.
For Everyday Commuters
A helpful accessory for regular trips through city streets.
For Cycling Enthusiasts
A technology-focused upgrade with practical lighting features.
For Bike-Gear Lovers
Directional projection gives this accessory a distinctive visual touch.
Mount It. Connect It. Signal Your Turn.
Mount the Taillight
Secure the light to a compatible round seatpost.
Attach the Remote
Position the wireless controller on your handlebar within easy reach.
Power On
Remove the remote's insulation tab and power on the system.
Select Your Signal
Use the remote to activate the desired lighting or turn mode.
A Simpler Way to Add Directional Signals to Your Bike.
The adjustable strap-based mounts make installation straightforward on compatible round tubes. Position the taillight so the rear LEDs and projected signal are not blocked by your bike or accessories.
Smart Rear Signaling with Two Bonus Wheel Lights.
The set combines the main remote-controlled rear signal light with two additional wheel lights for a more personalized bicycle lighting setup.
Smart LED Taillight
Main rear light with directional indicators and ground projection.
Wireless Remote
Compact handlebar controller for lighting and turn-signal functions.
2 Bonus Wheel Lights
Two additional decorative wheel lights included with the set.
The Details Behind the Smart Design.
Operating time, projected image clarity, audible range, and perceived brightness vary with mode, mounting position, ambient light, surface conditions, and battery charge.
Frequently Asked Questions.
How does the ground arrow projection work?
When a directional signal is activated, the optical system projects an illuminated arrow onto the pavement behind the bike. The effect is most noticeable in darker conditions.
Can I control the signals while riding?
Yes. The wireless remote mounts on a compatible handlebar and provides controls for left and right signaling and the available lighting modes. Practice operating it before riding.
Where does the beeping sound come from?
The audible alert is emitted from the rear taillight unit when a turn signal is activated. The advertised maximum level is up to 120dB.
Does it need disposable batteries?
The main taillight has a USB-C rechargeable battery. The wireless remote has its own power source and includes a battery insulation tab that must be removed before use.
Can I use it in the rain?
The taillight is advertised with an IP65 rating for dust and water resistance. It is intended to withstand rain and road spray, but it should not be submerged.
Will it fit my bicycle?
Yes, it applies to all bicycles.
How long does the battery last?
The product advertises up to 16 hours of runtime under certain operating conditions. Runtime varies depending on the lighting mode, projection usage, and remaining battery charge.
Make Your Next Turn a Little More Noticeable.
More Than a Taillight. A Smarter Way to Communicate.
Bright rear LEDs. Wireless turn controls. Directional ground arrows. An audible alert. All brought together in one rechargeable bicycle lighting accessory.
Equip Your Bike for the Ride Ahead.
From dark morning commutes to late-night trips home, add directional communication and a distinctive illuminated projection to your cycling setup.
